China Earphone logo Removing Solution 100% Working (6500 Port)

For china earphone logo removing solution of 6500 port just make a jumper from Battery (+) to Earphone plug in pin of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V2port earphone solution show this post For V3 port see this post
 

  
Note:Earphone/Headphone plug in pin may be different for different mobile.Such as,For Symphony B10i it is pin no.2 from left side of headphone/charging connector;For octenn T11 it is pin no.5 from right side of earphone/headphone connector.So to solve this problem you have to check every pin of headphone connector one by one.Remember that during checking time you have to power on your phone through DC Power Supply instant off Battery.If you power on your phone with battery during this time ,your may be damaged.So be careful about this. 




            

Symphony B10i Earphone logo 100% Working Solution

For Symphony B10i earphone logo removing solution just make a jumper from Battery (+) to Earphone plug in pin (Pin no.2 of Symphony B10i) of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V2port earphone solution show this post


                      

China Earphone Logo 100% working Solution (V3 port)

For china earphone logo removing solution for V3 port just make a jumper from Battery (+) to Earphone plug in pin (Pin no.2 of Symphony B10i) of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V2port earphone solution show this post




                               

 Proved Solution For Symphony B10i

China Earphone Logo 100% working Solution (V2 port)

For china earphone logo removing solution for V2 port just make a jumper from Battery (+) to Earphone plug in pin (Pin no.5 of Octenn T11) of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V3 port earphone solution show this post


                    

 This is Octenn-T11




Tested Phone:Octenn,Rangs,CCIT,Telego,Symphony,Experss,ZTE,Calme,China Nokia and much more.

All China HeadPhone/Earphone Logo 100% Working Solution

For China Mobile Earphone/Headphone logo removing Solution Just Make a Jumper from Battery (+) to Earphone base's earphone line in pin.If there is no problem from CPU it will work 100% granted.

          

Tested Phone by me:Vs me,Octenn,King Tel,Kingstar,G'Five,Symphony and Much more